Friday, February 15, 2019

Road trip, 2.13 to 2.14.19



This post is about the recent visit to the property out West.  The objectives were to stay
longer, but had to be cut short because of physical problem.

The visit was only 3 hours.  During this time, a practice post hole was dug out.  This was
a bit surprising in its ease.  The ground may be a lot softer than it seemed.  The use of a
shovel does not seem to work, but this drill with augur bit works quite well.  If anything,
it could mean that the ground is too soft, and therefore, may not support the structure
intended.  This gives some food for thought.

Also during this visit, a potential location for the cabin was sketched out with waypoints
saved on GPS device.  A quick review of the waypoints suggest that it may be difficult to
translate onto a map.  In addition to this, a video was made tracing out the steps involved
in the turnaround.  A turnaround is needed so that the rear of the trailer is facing west.
Without the turnaround, the trailer end would be facing east.  The significance of this is
that the trailing end is the bathroom, with the opposite end as the bedroom.  The goal is
to keep the bedroom on the opposite end from the hot sun.

While there, I met a local, and we had a nice chat.  He says he is on Facebook, and
will look for me.

It appears more people are out there.  Also, I can make a call out if I have a booster.  It
almost works without one.

Finally, I made a video along the road on the way out.  It is of poor quality, but along
with the others, I now have a video record of the full length of the route.

The trip was quite tiring, but I did cover a lot of ground in a little over 24 hours.

Saturday, February 9, 2019

World's largest 3-D printer used to print cars in East Tennessee

There aren't many pictures, and there isn't a whole lot of info about what it can produce.  Only that they can produce a vehicle with this technique.

I have seen a lot written about 3D manufacturing, but so far, there has been little to show for it.




Tuesday, February 5, 2019

SpaceX tests flight version of Raptor engine


Between 4 to 8 weeks before the "Hopper" testing begins.





Sunday, February 3, 2019

Musk will go to Moon first

The idea is to reduce capabilities so as to be able to fund the entire project, which is costly.

A trip to the Moon would be less costly.





Wednesday, January 30, 2019

Water can be abundant on Mars

Not only near the poles, but all over Mars.

But you need an energy source.  The sun won't be enough.





Saturday, January 26, 2019

Trip out West being considered


Now that the organizing chores have been completed, I am satisfied that I haven't written about this before. Come to think of it, maybe I have, but my organizing skill suck.

Anyway, the idea now is to go out West for a week or two, and check out a few things. One thing to check is to see how much money I can make driving for Uber in El Paso. The second thing is to see if I can drill some post holes using my drill and a small auger bit.

After that, there could be other things I could think of doing out there. But those two are the main things.

The trip could take place in the next month.

Off grid post, 1.26.19 ( organization )

An idea to add a table of contents occurred to me.  However, there is no need.  But there is a need to update all of the posts that don't have a descriptive enough title.  I have just completed that task.

Now I can scan the titles and see what each post was about without having to read further.  This is so I don't reinvent the wheel, so to speak.  If an idea or post has been done before, no need to write it all over again.


Thursday, January 24, 2019

Blue Origin's New Glenn Rocket


Comparable to a Falcon Heavy.